Do you know how to use electric scissors?

Nowadays, technology has really changed our lives. Whatever people need in life, they can be produced by technology in the near future. For example, the electric scissors introduced to you this time, people used to use traditional scissors, which were limited to cutting some small paper or easy-to-cut things. Unlike the electric scissors invented by people now, it can be used for cutting on metal plates, and it is easy to use and not easy to damage as traditional scissors.

Introduction to electric scissors

Electric scissors are double-insulated handheld electric tools that use single-phase series-excited motors as power and drive the working head through a transmission mechanism for shearing operations. They are convenient for shearing various shapes of steel plates, light weight, safe and reliable. They are widely used in sheet metal occasions in departments such as automobiles, shipbuilding, aircraft and repair, and are used to shear thin plates, metal plates and other plates.

How to use electric scissors:

1. Before use, connect the plug connection between the power transformer and the electric scissors (use a socket with a switch, turn off the socket switch before plugging the power adapter into the socket, and turn on the switch on the socket after plugging in the power).

2. Every time you start working, put a drop of oil on the intersection of the tungsten steel blade and the blade, let the electric scissors idle for one minute, then wipe off the oil and use it again, which will extend the service life of the electric scissors.

3. Plug the power plug into (100V-240V) AC (Note: the electric scissors use the output DC9V safe voltage).

4. Hold the electric scissors and aim the fork of the blade at the material to be cut.

5. Before the scissors approach the material to be cut, press the switch first, and then start cutting.

6. According to the material and shape of the material to be cut, reasonably adjust the operating posture and moving speed to achieve the best effect.

7. When cutting materials, if the motor speed is found to be significantly reduced, the forward speed of the electric scissors should be reduced in time.

8. When the blade is not sharp enough, remove the 3 blade cover screws to replace the blade, or use a 280# diamond grinding wheel to grind and continue to use (when the blade has no large gaps and gaps).